Description
The Bullet Series 50 Cal. Linear Actuator was developed to have a slim, in-line motor design. These units have built-in hall effect sensors, which allow for synchronization, position, and speed control. The Hall effect feedback is vital to applications where multiple actuators must travel in sync. Popular within robotics, manufacturing, marine, off-road vehicles, and home automation.
*674 lbs will no longer be available
*Product is now manufactured in silver
To synchronous 2 or more actuators together to run at exactly the same speed, we recommend our Control board FCB-1 for the ultimate Actuator control. This gives you complete actuator control including adjusting limits, speed, and even a series of timer functions to be able to time when an Actuator opens and closes.
CAD models of this actuator can be found under Resources/3D Files. For further information review the specifications and technical drawings (below) or visit our tutorials page for instructions on how to use this actuator with switches, remotes, speed controllers, and Arduino.
Tech Note: Hall Effect Sensors were modified between 2020 and 2021 production runs; previous HE Sensors had 12 magnet pairs, the current HE Sensor has 3 pairs. Please reference our Hall Effect Sensor Tutorial for PLC programming.
Accessories sold separately include: Remote Controls - Switches - Micro-Controllers - Power Supplies
Specifications
FA-BH50-500-12-(S) | FA-BH50-500-24-(S) | FA-BH50-674-12-(S) | FA-BH50-674-24-(S) | FA-BH50-1124-12-(S) | FA-BH50-1124-24-(S) | ||
Push/Pull Force | 500 lbs. | 500 lbs. | 674 lbs. | 674 lbs. | 1124 lbs. | 1124 lbs. | |
Static Force | 800 lbs. | 800 lbs. | 808 lbs. | 808 lbs. | 1348 lbs | 1348 lbs. | |
Speed at full load ("/s) | 0.36 | 0.36 | 0.145 | 0.145 | 0.08 | 0.08 | |
Gear Ratio | 51:1 | 51:1 | 50:1 | 50:1 | 100:1 | 100:1 | |
Voltage | 12V | 24V | 12V | 24V | 12V | 24V | |
Max Current at full load | 10A | 8A | 5A | 3A | 5A | 3A | |
Number of Hall magnet | 3PPR | 3PPR | 3PPR | 3PPR | 3PPR | 3PPR | |
Pitch of Leadscrew | P4.0*1T | P4.0*1T | P2.5*2T | P2.5*2T | P2.5*1T | P2.51T | |
Revolutions per inch stroke (25.4mm) | 6.35 | 6.35 | 5.08 | 5.08 | 10.16 | 10.16 | |
Hall Sensor pulses per revolution | 153PPR | 129PPR | 417PPR | 417PPR | 417PPR | 417PPR | |
Duty Cycle | 10% 1 min on and 10 min rest at full load | ||||||
Operating Temp. Range | -4°F to 149°F (-20°C to 65°C) | ||||||
IP Rating | 66 | ||||||
No Load Noise Level | 50-70 dB | ||||||
Diameter | 1.97" (50mm) | ||||||
Outer Housing Material | Aluminum 6061 | ||||||
Expansion Rod Material | Stainless Steel 304 | ||||||
Limit Switch | Built-In non-adjustable - For adjustable limit switch try our new Adjustable Limit Switch Actuators | ||||||
Feedback | Hall Effect Sensor | ||||||
Hall Sensor Pulses per inch of travel |
500 lbs: 971 p/in |
||||||
Hall Sensor Pulses per mm |
500 lbs: 153 p/mm |
||||||
Feedback Voltage |
5V | ||||||
Synchronous Capability |
Yes, with our Sync Control Board or a Microcontroller | ||||||
Cable Length | 1.5 feet | ||||||
Wire Gauge | 18AWG Motor, 20AWG Sensor | ||||||
Brackets | MB50 , MB50C or MB50U |
Stroke Length | Retracted Length | Extended Length | Weight (lb) | STEP File |
6" | 18.21" | 24.07" | 4.85 | FA-BH50-(F)-(V)-6 |
8" | 20.18" | 28.01" | 5.25 | FA-BH50-(F)-(V)-8 |
10" | 22.14" | 31.95" | 5.6 | FA-BH50-(F)-(V)-10 |
12" | 24.11" | 35.88" | 5.95 | FA-BH50-(F)-(V)-12 |
18" | 31.99" | 49.66" | 7.25 | FA-BH50-(F)-(V)-18 |
24" | 37.89" | 61.47" | 8.15 | FA-BH50-(F)-(V)-24 |
30" | 45.77" | 75.25" | 9.45 | FA-BH50-(F)-(V)-30 |
36" | 51.67" | 87.07" | 11.1 | FA-BH50-(F)-(V)-36 |
40" | 55.61" | 94.94" | 11.35 | FA-BH50-(F)-(V)-40 |
Technical Drawings
Curve Graphs
Product Video
Bullet Series 50 cal. Review
Comparison Video
Bullet Series 50 cal. vs 30 cal.
3D Model Downloads (.STEP)
674lb and 1124lb Force
Wiring Diagram
Click here to view our wiring diagram generator to help you set up your actuator system
Downloads